In August 2018, the Minnesota Department of Health issued an educational handout to raise consumers’ awareness of children’s personal care products that contain formaldehyde.
The use of formaldehyde has been prohibited in children’s products since 2013. The Minnesota Department of Health published an educational handout to educate consumers on the possible health hazards that may be posed when using children’s creams, lotions, and similar personal care products that contain high levels of formaldehyde.
In the educational handout, the below possible health hazards have been identified.
Development toxicity, especially in a fetus or as a child develops
Formation of cancer, genetic damage, or reproductive harm
Endocrine and hormonal system disruption
Damage to the nervous system and causing other systemic toxicity
On July 14, 2018, the Oregon Health Authority proposed to amend Toxic Free Kids Act by updating the list of high priority chemicals of concern (HPCC) for children’s products and the notification requirement.
According to the proposed amendment, the list of HPCC is updated to include 5 new chemicals while removing 3 existing chemicals simultaneously. The list of HPCC will contain 68 chemicals in total once the amendment is approved.
5 new chemicals to be included
Chemical Name | CAS Number |
Bisphenol S | 80-09-1 |
Triphenyl phosphate | 115-86-6 |
Tris(1-chloro-2-propyl) phosphate | 13674-84-5 |
Short-chain chlorinated paraffins | 85535-84-8 |
2-ethylhexyl-2,3,4,5-tetrabromobenzoate | 183658-27-7 |
3 previous chemicals to be removed
Chemical Name | CAS Number |
Phthalic anhydride | 85-44-9 |
Octamethylcyclotetrasiloxane | 556-67-2 |
Molybdenum and molybdenum compounds | 7439-98-7 |
Furthermore, the proposed amendment intended to clarify the notification requirements as below:
The number of children's products that contain HPCCCH either sold or offered for sale in Oregon shall be notified once every two years.
The notification shall cover the period from January 1, 2018 through December 31, 2019.
On August 10, 2018, the Mayor of San Francisco approved Ordinance 201-18 in amending the existing Environmental Code on Food Service and Packaging Waste Reduction Ordinance, and became the first city in the US to prohibit perfluoroalkyl and polyfluoroalkyl (PFAS) in single-use food service ware used for prepared, takeout and leftover food.
PFAS are synthetic chemicals commonly used in single-use service ware products to repel water and grease. They are extremely persistent in the environment and believed to pose adverse health effects to people.
“Food service ware” is defined as any food contact products designed for a single use for prepared foods, such as food containers, utensils, napkins and other similar items. “Food service ware accessories” are also mentioned and covered under the “Food service ware” category for all types of single-use items usually provided alongside prepared food for single usage, such as condiment packets, chopsticks, cup sleeves, stirrers and toothpicks. Items made of completely of aluminum or polystyrene foam coolers and ice chests are not included in the scope of this change.
Starting from January 1, 2020, restaurants, food retailers and vendors in San Francisco are not allowed to use single use food services wares containing PFAS.
On August 13, 2018, Health Canada issued an informational letter related to possible safety hazards of teething necklaces worn by children under three years of age. Manufacturers, importers and retailers of teething necklaces are responsible for properly addressing the safety concerns and ensuring their products comply with the requirements in the letter.
Health Canada has identified strangulation, choking and aspiration hazards as posed by teething necklaces worn by children under three years of age. These hazards could potentially lead to the death of a child.
Therefore, by considering current international safety standards and available Canadian regulations, four requirements have been published to determine the safety of teething necklaces.
Hazard | Related Requirements |
Strangulation | 1. ASTM F2923-14 Standard Specification for Consumer Product Safety for Children’s Jewelry Section 13.1 - Breakaway Tension Test (apply a 22.2 N force instead of the 66.6 N (15 lb) force) and 2. ASTM F963-17 Standard Consumer Safety Specification for Toy Safety Section 4.14.1.1 - Cords, Straps, and Elastics Containing a Breakaway Feature |
Choking and Aspiration | 3. Toys Regulations1 (SOR/2011-17) Section 7 - Small parts |
Labelling | 4. The following warning or its equivalent must appear on the product or its packaging in English and French: WARNING! Strangulation hazard. Adult supervision required at all times. Always remove for sleep. MISE EN GARDE! Risque d’étranglement. La supervision d’un adulte est requise en tout temps. Toujours retirer pour dormir. |
An evaluation of teething necklaces worn by children under three years of age from the local market is scheduled by Health Canada. Importers, manufacturers or retailers of such products are required to ensure their products meet the performance criteria listed above. Failure to demonstrate compliance may lead to further enforcement, including seizure, orders to take corrective action, a mandatory recall of products, administrative monetary penalties and criminal prosecution.
On August 10, 2018, the European Union published Commission Communication C2018 282/02 in the Official Journal of the European Union (OJEU). The journal lists the updated new harmonised standard under Toy Safety Directive 2009/48/EC.
The 5 harmonised standards are summarized below:
Standard (Updated) | Standard (Superseded) | Titles |
EN 71-1:2014+A1:2018 | EN 71-1:2014 | Safety of toys — Part 1: Mechanical and physical properties |
EN 71-3:2013+A3:2018 | EN 71-3:2013+A1:2014 | Safety of toys — Part 3: Migration of certain elements |
EN 71-7:2014+A2:2018 | EN 71-7:2014 | Safety of toys — Part 7: Finger paints — Requirements and test methods |
EN 71-8:2018 | EN 71-8:2011 | Safety of toys — Part 8: Activity toys for domestic use |
EN 71-14:2014+A1:2017 | EN 71-14:2014 | Safety of toys — Part 14: Trampolines for domestic use |
Starting March 1, 2019, the updated standards are required to show conformity to the toy safety directive.
On July 24, 2018, the Ministry of Trade, Industry and Energy (MOTIE) of South Korea issued Notice 2018-151 in amending Safety Standards for Children’s Products Subject to Safety Confirmation. The amendment relates to heavy metals.
In South Korea, children’s products are defined as a product or its component that are intended to be used by children under 13 years of age. According to the Special Act on Safety Management of Children’s Products, children’s products shall be tested and certified before entering the market.
In the latest amendment, 8 new heavy metals are introduced with the existing 11 heavy metals in the Harmful Substance Release requirement. A list of the new regulated heavy metals is shown as below.
Aluminum (Al)
Boron (B)
Cobalt (Co)
Manganese (Mn)
Strontium (Sr)
Tin (Sn)
Organic tin
Hexavalent chromium (Cr (Ⅵ))
This amendment will come into force on February 1, 2019 and a transition period is in place until February, 1 2022.
في أستراليا، عندما يتم تحديد المخاطر في المنتجات الاستهلاكية في أستراليا، يتم استدعاء المنتجات ونشرها في نشرة سلامة المنتجات في أستراليا، والتي يتم تحديثها يوميًا. وفيما يلي ملخص لحالات الاستدعاء في أستراليا من فبراير إلى يوليو 2018:
المخاطر | التردد |
خطر الاختناق | 25 |
خطر الإصابة | 17 |
خطر الحساسية | 13 |
خطر الحريق | 13 |
خطر الحرق | 6 |
خطر الاختناق | 6 |
خطر الصدمة الكهربائية | 5 |
مخاطر أخرى* | 14 |
*أخطار أخرى تشمل خطر المواد الكيميائية، خطر الغرق، خطر الاختناق، خطر السقوط، خطر التمزق، خطر الميكروبات، خطر النظر، خطر الاختناق، خطر السقوط، خطر التمزق، خطر التقلب بتكرار أقل من 5.
فئات المنتجات | التردد |
ألعاب الأطفال ومقالات رعاية الأطفال | 27 |
مستحضرات التجميل/العناية بالجسم | 16 |
كمبيوتر / صوت / فيديو / إلكترونيات وملحقاتها الأخرى | 11 |
الأثاث | 7 |
الأجهزة الكهربائية المنزلية (مجفف الشعر، المكواة، إلخ) | 5 |
فئات أخرى^ | 19 |
^ تشمل الفئات الأخرى الشموع ومواد الحرق والإكسسوارات، والمواد الكيميائية الاستهلاكية، والنظارات، والأقمشة / المنسوجات / الملابس / المنسوجات المنزلية، والمواد الملامسة للأغذية، والأدوات المنزلية (غير الملامسة للأغذية)، ومعدات الإضاءة، والسلع/المعدات الرياضية، والأدوات والأجهزة بتكرار أقل من 5. للحصول على قائمة كاملة انقر هنا
On September 2, 2018, conformity assessment bodies were informed by SASO that the implementation of phase 2 of the SASO Degradable Plastic Products Regulation has been postponed until February 1, 2019.
SASO Technical Regulation M.A-156-16-03-03 aims at determining the specific environmental requirements of certain degradable plastic products and requiring affixation of the SASO degradable logo on licensed products.
Plastic products under phase 2 include the following:
Bubble wrap and cushioning packaging
Bags for postal use (such as carrier bags, courier and security bags, magazine and newspaper bags)
Disposable tableware (such as plates, spoons and cups)
Flower wraps
Stretch films (packaging)
Overwraps (plastic covers used for secondary packaging)
Shrink Films
Cling films (packaging)
Packaging bags used for bread, nuts, sweets and all bakery items
The summary of the change in the implementation schedule is as follows:
Phase | Origin implementation date | New implementation date |
Phase 1 | April 14, 2017 | (no change) |
Phase 2 | February 1, 2018 | February 1, 2019 |
Phase 3 | August 1, 2019 | (no change) |
On July 20, 2018, the World Trade Organization (WTO) published Notification (G/TBT/N/SAU/1078) regarding the draft Technical Regulation for the General Safety of Electric Batteries by Saudi Standards, Metrology and Quality Organization (SASO).
The draft Technical Regulation applies to all batteries and accumulators regardless of size, weight and components. Batteries used in military, national defense, and space equipment are excluded from the scope of the regulation.
The draft set forth provisions for the following:
Restriction on the use of cadmium and mercury in the manufacture of batteries and their plastic packaging
International standards related to the placement of electric batteries on the market
Conformity assessment for ensuring compliance
Labelling requirements
Information to customers prior to placing products on the market, such as information on recycling and disposal
Setting the following chemical limits for the marketing and import of batteries:
General batteries, either independent or built into device or into vehicle | Button cell batteries used in alarm systems, medical devices and wireless equipment | |
Mercury | 0.0005% by weight | 2% by weight |
Cadmium | 0.002% by weight | 0.002% by weight |
Upon approval, the requirement will be adopted and enter into force 1 year from the date of publication in the KSA official gazette.
اشترك في نشرتنا حول تحديثات القوانين واللوائح
قم بإلغاء الاشتراك في أي وقت. اقرأ سياسة الخصوصية الخاصة بنا.